Titanium (Ti) Sputtering Target, 99.995% (4N5) Purity, Circular

SKU: TI-TAR-4N5-CIRC

Price range: £117.99 through £377.99

Dispatch normally within 1 business day; carrier transit normally 6–8 business days (7–9 business days in total). See Shipping Policy and Returns Policy.

Select an option to request a quote

Titanium (Ti) Sputtering Target, 99.995% (4N5) Purity, Circular

Nanostore’s Titanium (Ti) sputtering target is a metallic PVD source material for magnetron sputtering, ion sputtering, and laboratory thin-film deposition. It is supplied in circular target formats for research, development, and small-batch process work where clean handling, stated dimensions, and material identity are specified.

Key Features

Source Material
Supplied at 99.995% (4N5) purity for thin-film workflows that require controlled source composition for deposition work.

Circular Target Formats
Available in circular diameters including 1 inch diameter (25.4 mm), 1.97 inch diameter (50 mm), 2 inch diameter (50.8 mm), 2.36 inch diameter (60 mm), 3 inch diameter (76.2 mm), 3.15 inch diameter (80 mm), 4 inch diameter (101.6 mm), 3.94 inch diameter (100 mm). Thickness options include 3 mm thick, 4 mm thick, 5 mm thick, 6 mm thick, 6.35 mm thick, depending on the selected diameter and target configuration.

Controlled Processing and Inspection
Target preparation may include material selection, forming, heat treatment, precision machining, dimensional inspection, surface finishing, cleaning, and final quality review. Composition and impurity control may be supported by analytical methods such as ICP, GDMS, carbon/sulfur analysis, oxygen/nitrogen analysis, and metallographic inspection where appropriate.

Clean Handling and Packaging
Targets are prepared for deposition use with clean surface handling and protective packaging. Store sealed in a dry environment, handle with clean gloves, and avoid direct contact with oil, dust, moisture, or other surface contamination before installation.

Material Properties and Technical Indicators

The following material-property values are provided as reference technical indicators for material selection, source loading, process planning, and thin-film deposition evaluation:

– Element symbol: Ti
– CAS number: 7440-32-6
– Density: 4.506 g·cm⁻³
– Physical state: solid
– Melting point: 1668 °C
– Boiling point: 3287 °C
– Heat of vaporization: 425 kJ·mol⁻¹
– Specific heat capacity: 25.060 J·mol⁻¹·K⁻¹
– Crystal structure: hexagonal close-packed
– Thermal expansion coefficient: (25 °C) 8.6 µm·m⁻¹·K⁻¹
– Thermal conductivity: 21.9 W·m⁻¹·K⁻¹
– Electrical resistivity: (20 °C) 0.420 µΩ·m
– Young’s modulus: 116 GPa
– Shear modulus: 44 GPa
– Poisson’s ratio: 0.32
– Mohs hardness: 6.0
– Brinell hardness: 716 MPa

Common Applications

– adhesion and barrier layer deposition; titanium nitride process development; semiconductor and MEMS fabrication; functional coatings
– Academic, industrial, and pilot-scale thin-film process development

Specifications

MaterialTitanium (Ti)
Element symbolTi
Purity99.995% (4N5)
CAS number7440-32-6
Physical statesolid
Crystal structurehexagonal close-packed
Density4.506 g·cm⁻³
Melting point1668 °C
Boiling point3287 °C
Heat of vaporization425 kJ·mol⁻¹
Molar heat capacity25.060 J·mol⁻¹·K⁻¹
Thermal expansion coefficient(25 °C) 8.6 µm·m⁻¹·K⁻¹
Thermal conductivity21.9 W·m⁻¹·K⁻¹
Electrical resistivity(20 °C) 0.420 µΩ·m
Young's modulus116 GPa
Shear modulus44 GPa
Mohs hardness6.0
Brinell hardness716 MPa
Poisson's ratio0.32

Typical properties of the bulk material (literature values)

Chemical formulaTi
Molar mass47.867 g/mol

Source: PubChem (U.S. National Library of Medicine). Reference values for the bulk substance, not test results of a specific lot.

Option 1

99.995% (4N5)

Option 2

1 inch diameter (25.4 mm), 1.97 inch diameter (50 mm), 2 inch diameter (50.8 mm), 2.36 inch diameter (60 mm), 3 inch diameter (76.2 mm), 3.15 inch diameter (80 mm), 3.94 inch diameter (100 mm), 4 inch diameter (101.6 mm)

Option 3

3 mm thick, 4 mm thick, 5 mm thick, 6 mm thick, 6.35 mm thick