Showing 1–16 of 1535 results
-
SKU: MIC-Stub-287
£15.99
SEM specimen stub with a 30-degree cross-section face and an internal thread, 25 mm in diameter and 10 mm high. The stub is lightly polished and may show small machining marks that do not affect use. Dimensions are measured by hand and may vary slightly. Supplied as one stub.
-
SKU: MIC-Tweezers-31
£94.99
Fine tweezers with a tip angled at 45 degrees, for electron microscopy work, in nonmagnetic stainless steel (NM-SS). Length 105 mm, tip width x thickness 0.10 x 0.06 mm.
-
SKU: MIC-Stub-288
£15.99 – £35.99Price range: £15.99 through £35.99
SEM specimen stubs with an internal thread and a 45-degree angled face, in five sizes from 10 mm to 32 mm in diameter and from 10 mm to 20 mm high. Depending on the size, the angled face is listed as a sloped face or a cross-section face, as named in each option. The stubs…
-
SKU: MIC-Stub-292
£35.99 – £78.99Price range: £35.99 through £78.99
SEM specimen stubs with an internal thread and a 45/90-degree cross-section face, 10 mm high, in 25 mm and 50 mm diameter. The stubs are lightly polished and may show small machining marks that do not affect use. Dimensions are measured by hand and may vary slightly. Each option is one stub.
-
SKU: MIC-Stub-471
£31.99
SEM specimen stub with 45/90-degree sloped faces, 15 mm in diameter and 10 mm high. The stub is lightly polished and may show small machining marks that do not affect use. Dimensions are measured by hand and may vary slightly. Supplied as one stub.
-
SKU: MIC-Stub-289
£47.99
SEM specimen stub with a 75-degree cross-section face and an M4 internal thread, 20 mm in diameter and 10 mm high. The stub is lightly polished and may show small machining marks that do not affect use. Dimensions are measured by hand and may vary slightly. Supplied as one stub.
-
SKU: MIC-CrossSectionStub-488
£47.99 – £55.99Price range: £47.99 through £55.99
SEM specimen stubs with a 90-degree cross-section face, 25 mm in diameter, in two versions: a pin-type stub with an 8 mm pin height, and a stub with an internal thread, 19 mm high. The stubs are lightly polished and may show small machining marks that do not affect use. Dimensions are measured by hand…
-
SKU: MIC-Stub-294
£35.99 – £78.99Price range: £35.99 through £78.99
SEM specimen stubs with a 90/90-degree cross-section face, in six sizes from 25 mm to 50 mm in diameter and from 10 mm to 16 mm high. The options state which sizes have an internal thread. The stubs are lightly polished and may show small machining marks that do not affect use. Dimensions are measured…
-
SKU: MIC-TweezerStand-66
£204.99
Tweezer stand with an acrylic base plate and ten aluminium pegs that hold five pairs of tweezers on the plate. The tweezers are easy to pick up and store. They can be seen at a glance, and their tips are protected from knocks. The smooth surface is easy to clean. The stand is about 150…
-
SKU: MIC-EmbeddingMold-301
£18.99
Silicone embedding mould with 21 numbered cavities and a double-head design, so that two sets of samples can be embedded in one mould. Mould size 72 x 62 x 6 mm; cavity size 5 x 14 x 3 mm; the top end is 2 mm wide. Seven colours are offered, which makes it easy to…
-
SKU: MIC-130
£94.99 – £377.99Price range: £94.99 through £377.99
Single-crystal silicon pieces cut to size, supplied in packs of 10. Five square sizes are offered, from 3 x 3 mm to 20 x 20 mm. The pieces are single-side polished and can be used as substrates for AFM and SEM work. Orientation, thickness and doping are not listed, so check that they suit your…
-
SKU: MIC-85
£7.99 – £31.99Price range: £7.99 through £31.99
Cylindrical SEM specimen stubs in aluminium, without a threaded hole, in eleven sizes from 9.5 mm to 50 mm diameter and from 5 mm to 20 mm high. The stubs are lightly polished and may show small machining marks that do not affect use. Dimensions are measured by hand and may vary slightly from the…
-
SKU: MIC-174
£51.99 – £77.99Price range: £51.99 through £77.99
Storage boxes for cylindrical SEM specimen stubs, the type used on JEOL stages. Each box holds four stubs and measures 7.3 x 3 x 2.2 cm (height 2.2 cm). The stubs are not included. Two versions are offered: for stubs of 9.5 mm diameter and for stubs of 12.5 mm diameter. Supplied as one set.
-
SKU: MIC-GridEvapHolder-286
£393.99
Holder for TEM grids used during evaporation coating. It holds 25 grids and measures 35 x 35 x 6.4 mm. Supplied as one holder, without grids.
-
SKU: MIC-272
£39.99
Eyelash brush, 200 mm long. It is used to handle wet and frozen ultrathin sections: separating tiny sections and removing small fragments.
-
SKU: MIC-228
£815.99 – £835.99Price range: £815.99 through £835.99
Faraday cups, offered in three versions: on a grooved pin stub (size Ø32 x 12.7 mm), on an internally threaded stub (size Ø12.5 x 10 mm), or the cup alone (2.5 mm diameter, 2 mm high).