Silicon (Si) Sputtering Target, 99.999% Purity, Intrinsic / N-Type / P-Type, Circular

SKU: SI-TAR-5N-CIRC

Price range: £137.99 through £707.99

Dispatch normally within 1 business day; carrier transit normally 6–8 business days (7–9 business days in total). See Shipping Policy and Returns Policy.

For research and laboratory use only. Not for medical, diagnostic or household use.

Select an option to request a quote

Silicon (Si) Sputtering Target, 99.999% Purity, Intrinsic / N-Type / P-Type, Circular

Nanostore’s Silicon (Si) sputtering target is a 99.999% purity, intrinsic / n-type / p-type semiconductor PVD source material for magnetron sputtering, ion sputtering, and laboratory thin-film deposition. It is supplied in circular target formats for research, development, and small-batch process work where clean handling, dimensional consistency, and consistent material identity are important.

Key Features

Source Material
Supplied as 99.999% Purity, Intrinsic / N-Type / P-Type for thin-film workflows that require controlled source composition and dependable deposition behavior.

Circular Target Formats
Available in circular diameters including 1 inch diameter (25.4 mm), 1.97 inch diameter (50 mm), 2 inch diameter (50.8 mm), 2.36 inch diameter (60 mm), 3 inch diameter (76.2 mm), 4 inch diameter (101.6 mm). Thickness and mounting options include 3 mm thick, 4 mm thick, 5 mm thick, 6 mm thick, 6.35 mm thick, 3 mm + 2 mm Cu backing, depending on selected configuration.

Controlled Processing and Inspection
Target preparation may include material selection, forming, heat treatment, precision machining, dimensional inspection, surface finishing, cleaning, and final quality review. Composition and impurity control may be supported by analytical methods such as ICP, GDMS, carbon/sulfur analysis, oxygen/nitrogen analysis, and metallographic inspection where appropriate.

Clean Handling and Packaging
Targets are prepared for deposition use with clean surface handling and protective packaging. Store sealed in a dry environment, handle with clean gloves, and avoid direct contact with oil, dust, moisture, or other surface contamination before installation.

Mounting Configuration Note
Selected configurations for this product include mounting options such as 3 mm + 2 mm Cu backing. Choose the plain target, Cu-backed target, and/or magnetic-shim configuration according to the sputtering source geometry and cathode requirements.

Material Properties and Technical Indicators

The following material-property values are provided as reference technical indicators for material selection, source loading, process planning, and thin-film deposition evaluation:

– Element symbol: Si
– CAS number: 7440-21-3
– Density: 2.3290 g·cm⁻³
– Physical state: solid
– Melting point: 1414°C
– Boiling point: 3265°C
– Heat of fusion: 50.21 kJ·mol⁻¹
– Heat of vaporization: 359 kJ·mol⁻¹
– Specific heat capacity: 19.789 J·mol⁻¹·K⁻¹
– Crystal structure: diamond cubic
– Magnetic order: diamagnetic
– Thermal expansion coefficient: (25 °C) 2.6 µm·m⁻¹·K⁻¹
– Thermal conductivity: 149 W·m⁻¹·K⁻¹
– Young’s modulus: 130-188 GPa
– Shear modulus: 51-80 GPa
– Bulk modulus: 97.6 GPa
– Mohs hardness: 7
– Poisson’s ratio: 0.064 – 0.28
– Band gap: 1.12 eV

Common Applications

– semiconductor thin-film research; Si-based device and sensor development; doped and intrinsic silicon film studies; microfabrication process development
– Academic, industrial, and pilot-scale thin-film process development

Specifications

MaterialSilicon (Si)
Element symbolSi
Purity99.999%
Available diameters1 inch diameter (25.4 mm), 1.97 inch diameter (50 mm), 2 inch diameter (50.8 mm), 2.36 inch diameter (60 mm), 3 inch diameter (76.2 mm), 3.15 inch diameter (80 mm), 4 inch diameter (101.6 mm), 3.94 inch diameter (100 mm)
Available thickness / backing3 mm thick, 4 mm thick, 5 mm thick, 6 mm thick, 6.35 mm thick, 3 mm + 2 mm Cu backing
CAS number7440-21-3
Physical statesolid
Crystal structurediamond cubic
Magnetic orderdiamagnetic
Density2.3290 g·cm⁻³
Melting point1414°C
Boiling point3265°C
Heat of fusion50.21 kJ·mol⁻¹
Heat of vaporization359 kJ·mol⁻¹
Molar heat capacity19.789 J·mol⁻¹·K⁻¹
Thermal expansion coefficient(25 °C) 2.6 µm·m⁻¹·K⁻¹
Thermal conductivity149 W·m⁻¹·K⁻¹
Young's modulus130-188 GPa
Shear modulus51-80 GPa
Bulk modulus97.6 GPa
Mohs hardness7
Poisson's ratio0.064 - 0.28
Band gap1.12 eV
Option 1

99.999% (5N) — intrinsic, 99.999% (5N) — N-type, 99.999% (5N) — P-type

Option 2

1 inch diameter (25.4 mm), 1.97 inch diameter (50 mm), 2 inch diameter (50.8 mm), 2.36 inch diameter (60 mm), 3 inch diameter (76.2 mm), 4 inch diameter (101.6 mm)

Option 3

3 mm + 2 mm Cu backing, 3 mm thick, 4 mm thick, 5 mm thick, 6 mm thick, 6.35 mm thick