Embossed Aluminum Laminated Film for Pouch Cell Case

£215.99

Option 1

Clear

Select an option to request a quote

Flat rate shipping £15

Description
Additional information

Embossed Aluminum Laminated Film for Pouch Cell Case

Detailed Specifications
– Material Composition:
* Outer Layer (Polyamide): 0.025 mm (+-0.0025 mm) (JIS Z1714)
* Adhesive (Polyester-polyurethane): 4-5 g/m²
* Barrier Layer (Aluminum foil): 0.040 mm (+-0.004 mm) (JIS A8079, A8021)
* Adhesive (Urethane-free): 2-3 g/m²
* Inner Layer (Polypropylene): 0.040 mm (+-0.004 mm)
– Performance Metrics:
* Molding Depth: >= 5.0 mm
* Laminate Strength: Nylon/Al > 2N/15 mm, Al/CPP > 5N/15 mm
* Heat Seal Strength: >= 29.4N/15 mm (at 200°C x 0.2Mpa x 2 sec)
* Moisture/O2 Transmission Rate: 200ppm / 5 years
– Quality Standards:
* Impurity: Diameter <= 1 mm
* Fish Eye: Diameter <= 2 mm (clear), <= 1 mm (coloured)
* Electrical Insulating: Good
* Solvent Retention: Less than 5mg/m²

Option 1

62 mm length x 46 mm width x 1 mm thickness, 50 pieces per pack, 62 mm length x 46 mm width x 2 mm thickness, 50 pieces per pack, 62 mm length x 46 mm width x 3 mm thickness, 50 pieces per pack, 62 mm length x 46 mm width x 4 mm thickness, 50 pieces per pack, 62 mm length x 46 mm width x 5 mm thickness, 50 pieces per pack, 62 mm length x 46 mm width x 6 mm thickness, 50 pieces per pack, 85120 air-pocket type, 105 mm length x 84 mm width x 3 mm thickness, embossed using 280 mm x 200 mm aluminum-plastic laminate, 50 pieces per pack, 85120 air-pocket type, 105 mm length x 84 mm width x 4 mm thickness, embossed using 280 mm x 200 mm aluminum-plastic laminate, 50 pieces per pack, 85120 air-pocket type, 105 mm length x 84 mm width x 5 mm thickness, embossed using 280 mm x 200 mm aluminum-plastic laminate, 50 pieces per pack, 85120 air-pocket type, 105 mm length x 84 mm width x 6 mm thickness, embossed using 280 mm x 200 mm aluminum-plastic laminate, 50 pieces per pack